about us
The NRIBA was founded in 2008, led by huada biotechnology co, ltd, specializing in e-beam accelerator R & D, system design, X-ray sterilization equipment production, and supplies of a comprehensive high-tech group, offers you a solution adapted to your needs.
With more than 50 electron beam irradiation machines installed worldwide today, it is the most widely used industrial accelerator in the world.
Our Services
Provide technical support, detailed program, and solutions.
Design, production, construction, installation integrated service.
Provide IQ, OQ, free PQ guidance, training and regular maintenance.
products
electron beam irradiation Outputs From 2MeV To 10 MeV And Operate At Power Levels From 10kW To 600kW. Acquisition and operational costs are compressed to a minimum with this concept using one accelerator and one conveyor.
Outputs From 3MeV To 7 MeV. Operate At Power Levels From 300kW To 600kW. X-ray sterilization offers better penetration characteristics than either gamma or E-beam.
The length of the Conveying Line is about 80m, the height is 55cm and the width is 1m. It is also controlled by PLC, the speed of the transmission chain is controlled by the frequency converter, and the power source of the transmission chain is provided by the motor.
Complete set of instruments, experimental testers and consumables. Contamination bacteria determination, molecular pump, irradiation dose verification, dose audit, bacteria resistance test, sterilization effect test, etc.
category
High energy electron beam
▶ Outputs From 2MeV To 10 MeV
▶ Power Levels: 10kW To 600kW
▶ From 30 to 100 thousand m3/y
▶ electric efficiency: 14% - 70%
▶ greater power, higher efficiency
▶ For Low-density, uniformly packaged
Inquiry
Ultra high energy X-ray
▶ Power Levels: 300kW To 600kW
▶ Outputs From 5MeV To 7 MeV
▶ From 9 to 250 thousand m3/y
▶ electric efficiency: 10% - 50%
▶ greater power, higher efficiency
▶ For Medical Devices or other items
Inquiry
▶ Food Preservation
▶ Polymer Crosslinking & Curing
▶ Biologics and tissue
▶ Heat Shrink Products
▶ Wire, Cable & Semiconductors
▶ Tire and Rubber & PEX-c Tubing
▶ Industrial wastewater degradation, etc
Inquiry
contact
NRIBA Was Founded In 2008, Specialize In Producing And Supplying E-beam & X-ray Sterilization Irradiators. Supply & Installation electron beam irradiation equipment on a turnkey basis.
+86 176 6574 6669
Jacky Jiang
NO.66, Xiasha District, Hangzhou city, Zhejiang Province
Copyright © 2022.NRIBA All rights reserved.
Supply & Installation electron beam accelerator.
E-beam sterilization
X-ray sterilization
Automatic Conveyor
Test Instrument
Jacky Jiang
+86 176 6574 6669